Hardware Flow Control
Eröffnet am: 2019-05-03 09:14
Letztes Update: 2021-04-29 06:07
| Auswertung: | ckeays | Verantwortlicher: | (Keine) |
|---|---|---|---|
| Priorität: | 5 - Mittel | Meilenstein: | (Keine) |
| Typ: | Fehler | Schweregrad: | 5 - Mittel |
| Komponente: | Tera Term | Status: | Offen |
| Lösung | Keine |
Einzelheiten
Hardware flow control in serial port setup does not work. Using CTS and RTS. I have tested this with other terminal programs including Hyperterminal and it is working. Something is wrong with Teraterm.
Kommentar
Reply To ckeays
I apologize for the urgency, but I am still expecting your respoinse regarding my archive testing. Please let me know if you have any questions.
No. the hardware flow control does not work with an RS232 (DB9) serial port. I did get it to work with a USB to TTL CH340 device. Other terminal programs are working with the DB9 serial port and USB to TTL devices, (as mentioned previously). I tried 4 different versions of Teraterm all the way back to version 2.3, the problem still exists.
Are you using different flow control pins for the DB9 RS232 port other than CTS and RTS? Remember I am connection to a real serial port not USB converter.