Hardware Flow Control Does not work in Teraterm
Eröffnet am: 2022-07-30 01:34
Letztes Update: 2023-01-21 04:02
Auswertung: | john_smyth | Verantwortlicher: | (Keine) |
---|---|---|---|
Priorität: | 5 - Mittel | Meilenstein: | (Keine) |
Typ: | Fehler | Schweregrad: | 9 - Höchste |
Komponente: | Hardware/Driver | Status: | Offen |
Lösung | Keine |
Einzelheiten
Hardware flow control in Teraterm setup does not work using CTS and RTS. I am using an RS232 real serial port (not a USB to RS232 cable or USB to TTL cable).
I have tested this Hyperterminal and it is working. Something is wrong with Teraterm. Data is lost when using Teraterm most likely because it ignores the CTS/RTS signals.
I am using TeraTerm Version 4.106.
Kommentar
oh so they renamed hardware to RTS/CTS.
I am assuming you have no desktop or laptop with a serial port. I have several and I am willing to test here. Let me know. Regards,