Conflict with TI code composer
Open Date: 2014-11-24 17:56
Letztes Update: 2014-11-24 21:24
| Reporter: | mir_hossein | Eigentümer: | (None) |
|---|---|---|---|
| Priority: | 6 | MileStone: | (None) |
| Type: | Bugs | Severity: | 5 - Medium |
| Component: | Tera Term | Status: | Closed |
| Resolution | None |
Details
I use Teraterm to monitor the serial output of my custom board. On my system I have a COM port without USB to serial converter.
The OS is Windows 7 x64.
To debug the board, I use TI XDS100V2 and Code Composer Studio V6.0.1
If the Teraterm is open on COM1, the Code composer can not connect to the board. Closing Teraterm resolves the issue.
I checked that there is an FTDI chip on XDS100V2, means the XDS100V2 uses a kind of USB to serial interface but it does not enumerate itself as a COM port in device manager.
Last Update of this Ticket
2014-11-24 21:24 Update by: mir_hossein
- Ticket Close date set to 2014-11-24 21:24
- Status Update from Open to Closed.
Kommentar
Reply To maya
Ok, I have checked with Hyperterminal and got the same result.
It seems that the problem is in "Code composer studio", I should discuss it with TI developers.
Thank you.