corrupt output in terminal window
Eröffnet am: 2010-08-24 21:57
Letztes Update: 2011-03-30 21:29
| Auswertung: | (Anonym) | Verantwortlicher: | (Keine) |
|---|---|---|---|
| Priorität: | 5 - Mittel | Meilenstein: | (Keine) |
| Typ: | Fehler | Schweregrad: | 5 - Mittel |
| Komponente: | Tera Term | Status: | Offen |
| Lösung | Keine |
Einzelheiten
This bug has existed for a long time in TerraTerm.
After 20 to 30 minutes of use, or after a large volume of data has been sent/displayed on screen the output becomes very corrupted. The only solution is to exit terraterm and restart.
It is easy to reproduce - for example connect two PCs together, on PC(A) send a large file (2 to 3 megabytes) at a high baudrate (example 115200)
In my case I have a small embeded ARM cpu board with a serial port that generates lots of data. I can do the same with two PCs.
The receiving PC may overflow and get lost during the high volume transfer. But - when the data transfer has completed or stopped - I would expect the display to return to normal. I should be able to "reset" or "clear" the display and return to normal operation. I cannot. I should not be required to *exit* terra term.
NOTE: If I am capturing the log data, the data seems reasonable and not corrupted. Only the screen gets corrupted.
Kommentar
have the same problem, can't find any solution :) i think it has nothing to do with teraterm, it must be a windows7 problem